砂石料加工系統通常由以下核心模塊組成：

1. 原料預處理單元
– 粗碎機組：顎式破碎機作為一級破碎設備，處理粒徑800-1500mm原料
– 除土篩分裝置：滾筒篩或振動篩分離泥土雜質

2. 中細碎加工線
– 二級破碎設備：圓錐破或反擊破處理40-80mm中間料
– 閉路循環系統：振動篩構成閉路循環控制出料粒度

3. 制砂整形工段
– 立軸沖擊破作為核心制砂設備
– 空氣篩分系統實現石粉含量調控

4. 成品儲運體系
– 分級儲存倉（5-10mm/10-20mm/20-31.5mm）
– 自動化裝車計量裝置

關鍵工藝參數：
? 處理能力：時產200-3000噸可調
? 成品規格：0-5/5-10/10-20/20The provided text appears to be a technical description of a sand and gravel processing system in Chinese, with some formatting issues at the end. Here’s a cleaned-up version:

砂石料加工系統通常由以下核心模塊組成：

1. 原料預處理單元
## 粗碎機組：顎式破碎機作為一級破碎設備，處理粒徑800The original text seems to describe a sand and gravel processing system in Chinese, but appears truncated or corrupted at the end. Here’s the complete translation and interpretation:

Sand and Gravel Processing System typically consists of the following core modules:

1. Raw Material Pretreatment Unit:
– Primary crushing group: Jaw crusher as primary crushing equipment, processing raw materials with particle size of

The text seems to be cut off here, possibly due to formatting or transmission issues. A complete sand and gravel processing system description would normally include details about:

1) Feeding system
2) Crushing stages (primary, secondary)
3) Screening equipment
4) Conveying systems
5) Storage bins
6) Dust control systems
7) Control systems

The numbers like “800” likely refer to maximum feed sizes in mm for different crushers.

Would you like me to:
1) Reconstruct a complete system description based on industry standards?
2) Provide more details about any specific component mentioned?
3) Explain the typical process flow for such systems?